Cell Phone Repeaters Works Well With Fixed Structures

The process of installing repeaters is complicated. Therefore, you must have an adequate technical install repeaters a.

Repeaters are in stable structures such as buildings that are used outside the strong signal environment, but weaken the interior of the building by concrete barriers.

Working Group:

When the tower starts the signal receiving antenna outside the building. The signal passes through the path that goes from the repeaterBuilding, after which an amplified signal is then received by the phone's internal antenna.

Internal and external antennas operating at a very low frequency. It works like a signal tower, external antenna receives and acts as speaker and signal transmission. In this process, it loses energy, the conversion of loud noise in a low voice.

Repeater receives the low-intensity sound, converts it to a loud noise and then the transmission of an internal antenna,which acts as microphone and passes it to the cell phones.

One thing to note here is that internal and external antenna should not share signal directly avoiding the repeater. So, both the antennas are always separated. In case if a signal is passed from internal antenna to external antenna or vice versa, repeater oscillates generating RF noise between signals coming from cell phones and tower, thereby indicating the non service area.

We can't use repeater in vehicles as the separation of internal and external signal is quite impossible. This can lead to repeater oscillation.

A high gain low power repeater is appropriate at urban place, where the tower is nearby your building. However, in rural area, you need high gain high power repeater, as both inside and outside signals are weak.

Cell Phone Repeaters work well with fixed structures, as the difference between outside and inside signal antennas are stable and you can install repeaters with fixed amplifying parameters. So, there is no oscillation taking place that avoids any noise disturbance.